Air-cooled industrial chillers, as a relatively efficient refrigeration equipment among chiller products, are most widely used in the domestic industrial market and have become essential equipment required for many industrial productions. However, the operation of air-cooled industrial chillers often requires careful daily maintenance and servicing. So, how should the normal safety maintenance and inspection of air-cooled industrial chiller products be carried out in daily life? Now, let the technicians of Anyida introduce to you how to conduct safety inspections for air-cooled industrial chillers.

Air-cooled industrial chillers

1. Regularly inspect the compressor

The compressor is the "heart" of the industrial chiller, and its quality directly affects the stability of the chiller during use. For the necessary acceptance tests of the chiller unit, they should be carried out in accordance with the principles of first conducting the airtightness test, then the vacuum test, first conducting the itemized tests, and then the overall machine test.

2. Regularly clean the condenser and evaporator

In addition to inspecting the technical performance of the chiller unit, attention should also be paid to protecting the tidy appearance of the unit and the cleanliness of the working site.

3. Regularly inspect the instruments

If the temperature control meter is out of control, replace the temperature control meter. High-voltage fault. Poor heat dissipation, the radiator is too dirty, clean the radiator. Poor ventilation, improve the ventilation conditions. The heat dissipation fan does not work, check whether the fan motor is burned out, short-circuited, repaired or replace the motor. The high-voltage actuator is damaged, replace the high-voltage actuator.

The efficient refrigeration function of air-cooled industrial chiller products is inseparable from their daily maintenance and safety inspections. Therefore, it is very important to frequently inspect the operation of air-cooled industrial chillers. In addition to the above three main inspection aspects, it is also necessary to pay attention to inspecting the oil level and oil temperature of each compressor, inspecting the main power supply voltage and current, and inspecting whether the set value of the chilled water supply temperature is appropriate. If there are any problems, they should be changed in time.